common_reference_t of reference_wrapper Should Be a Reference Type

Document #: P2655R3
Date: 2023-02-07
Project: Programming Language C++
Audience: SG9, LEWG
Reply-to: Hui Xie
<>
S. Levent Yilmaz
<>
Tim Song
<>

1 Revision History

1.1 R3

1.2 R2

1.3 R1

1.4 R0

2 Abstract

This paper proposes a fix that makes the common_reference_t<T&, reference_wrapper<T>> a reference type T&.

3 Motivation and Examples

C++20 introduced the meta-programming utility common_reference 21.3.8.7 [meta.trans.other] in order to programmatically determine a common reference type to which one or more types can be converted or bound.

The precise rules are rather convoluted, but roughly speaking, for given two non-reference non-cv qualified types X and Y, common_reference<X&, Y&> is equivalent to the expression decltype(false ? x : y) where x and y are qualified X& and Y&, respectively, provided the ternary expression is valid. (cv-qualified references are treated differently, and is explained below in Section 4.4.) Otherwise, basic_common_reference trait is consulted, which is a customization point that allows users to influence the result of common_reference for user-defined types. (Two such specializations are provided by the standard library, namely, for std::pair and std::tuple which map common_reference to their respective elements.) And if no such specialization exists, then the result is common_type<X,Y>.

The canonical use of reference_wrapper<T> is its being a surrogate for T&. One might expect that the ternary operator would yield a T&, but due to language rules, that is not quite the case:

int i = 1, j = 2;
std::reference_wrapper<int> jr = j; // ok - implicit constructor
int & ir = std::ref(i); // ok - implicit conversion
int & r = false ? i : std::ref(j); // error - conditional expression is ambiguous.

The reason for the error is not because i and ref(j), an int& and a reference_wrapper<int>, are incompatible. It is because they are too compatible! Both types can be converted to one another, so the type of the ternary expression is ambiguous.

Hence, per the current rules of common_reference as summarized above, and with the lack of any basic_common_reference specialization, the evaluation falls back to common_type<T, reference_wrapper<T>>, whose ::type is valid and equal to T. In other words, common_reference determines that the reference type to which both T& and a reference_wrapper<T> can bind is a prvalue T!

The authors believe this current determination logic for common_reference for an lvalue reference to a type T and its reference_wrapper<T> is merely an accident, and is incompatible with the canonical purpose of the reference_wrapper. The answer should have been T&. (Note that, there is no ambiguity with a reference_wrapper<T> and rvalue of T, since former is convertible to latter, but not vice versa.)

This article proposes an update to the standard which would change the behavior of common_reference to evaluate as T& given T& and an a reference_wrapper<T>, commutatively. Any evolution to implicit conversion semantics of reference_wrapper, or of the ternary operator for that matter, is out of the question. Therefore, the authors propose to implement this change via providing a partial specialization of basic_common_reference trait.

Below are some motivating examples:

C++20
Proposed
static_assert(same_as<
   common_reference_t<int&, reference_wrapper<int>>,
   int>);

static_assert(same_as<
   common_reference_t<int&, reference_wrapper<int>&>,
   int>);

static_assert(same_as<
   common_reference_t<int&, const reference_wrapper<int>&>,
   const int&>);
static_assert(same_as<
   common_reference_t<int&, reference_wrapper<int>>,
   int&>);

static_assert(same_as<
   common_reference_t<int&, reference_wrapper<int>&>,
   int&>);

static_assert(same_as<
   common_reference_t<int&, const reference_wrapper<int>&>,
   int&>);
class MyClass {
    vector<vector<Foo>> foos_;
    Foo delimiter_;

   public:
    void f() {
        auto r = views::join_with(foos_, 
                   views::single(std::ref(delimiter_)));
        for (auto&& foo : r) {
          // foo is a temporary copy
        }
    }
};
class MyClass {
    vector<vector<Foo>> foos_;
    Foo delimiter_;

   public:
    void f() {
        auto r = views::join_with(foos_, 
                   views::single(std::ref(delimiter_)));
        for (auto&& foo : r) {
          // foo is a reference to the original element
        }
    }
};
class MyClass {
    vector<Foo> foo1s_;
    Foo foo2_;

   public:
    void f() {
        auto r = views::concat(foo1s_, 
                   views::single(std::ref(foo2_)));
        for (auto&& foo : r) {
          // foo is a temporary copy
        }
    }
};
class MyClass {
    vector<Foo> foo1s_;
    Foo foo2_;

   public:
    void f() {
        auto r = views::concat(foo1s_, 
                   views::single(std::ref(foo2_)));
        for (auto&& foo : r) {
          // foo is a reference to the original element
        }
    }
};

In the second and the third example, the user would like to use views::join_with and views::concat [P2542R2], respectively, with a range of Foos and a single Foo for which they use a reference_wrapper to avoid copies. Both of the range adaptors rely on common_reference_t in their respective implementations (and specifications). As a consequence, the counter-intuitive behavior manifests as shown, where the resultant views’ reference type is a prvalue Foo. There does not seem to be any way for the range adaptor implementations to account for such use cases in isolation.

4 Design

4.1 Why Should the Result be T& and not reference_wrapper<T>

As they can both be converted to each other, the result of common_reference_t can be either of them in theory. However, the authors believe that the users would expect the result to be T&. Given the following example,

auto r = views::concat(foos, 
           views::single(std::ref(foo2_)));
for (auto&& foo : r) {
  foo = anotherFoo;
}

If the result is reference_wrapper<T>, the assignment inside the for loop would simply rebind the reference_wrapper to a different instance. On the other hand, if the result is T&, the assignment would call the copy assignment operator of the original foos. The authors believe that the latter design is the intent of code and is the natural choice.

4.2 Alternatives Considered

The following are some of the alternatives that considered originally. But later dropped in favor of the one discussed in the next section.

4.2.1 Option 1: Support Exact Same Type with CV-Ref Variations

One option would be to provide customisations for only reference_wrapper<T> and cv-ref T. Note that this version is rather restrictive:

template <class T, class U, template <class> class TQual,
          template <class> class UQual>
    requires std::same_as<T, remove_cv_t<U>>
struct basic_common_reference<T, reference_wrapper<U>, TQual, UQual> {
    using type = common_reference_t<TQual<T>, U&>;
};

template <class T, class U, template <class> class TQual,
          template <class> class UQual>
    requires std::same_as<remove_cv_t<T>, U>
struct basic_common_reference<reference_wrapper<T>, U, TQual, UQual> {
    using type = common_reference_t<T&, UQual<U>>;
};

4.2.2 Option 2: Treat reference_wrapper<T> as T&

This options completely treats reference_wrapper<T> as T& and delegates common_reference<reference_wrapper<T>, U> to the common_reference<T&, U>. Therefore, it would support any conversions (including derived-base conversion) that T& can do.

template <class T, class U, template <class> class TQual, template <class> class UQual>
    requires requires { typename common_reference<TQual<T>, U&>::type; }
struct basic_common_reference<T, reference_wrapper<U>, TQual, UQual> {
    using type = common_reference_t<TQual<T>, U&>;
};

template <class T, class U, template <class> class TQual, template <class> class UQual>
    requires requires { typename common_reference<T&, UQual<U>>::type; }
struct basic_common_reference<reference_wrapper<T>, U, TQual, UQual> {
    using type = common_reference_t<T&, UQual<U>>;
};

Immediately, it run into ambiguous specialisation problems for the following example

common_reference_t<reference_wrapper<int>, reference_wrapper<int>>;

A quick fix is to add another specialisation

template <class T, class U, template <class> class TQual, template <class> class UQual>
    requires requires { typename common_reference<T&, U&>::type; }
struct basic_common_reference<reference_wrapper<T>, reference_wrapper<U>, TQual, UQual> {
    using type = common_reference_t<T&, U&>;
};

However, this has some recursion problems.

common_reference_t<reference_wrapper<reference_wrapper<int>>,
                   reference_wrapper<int>&>;

The user would expect the above expression to yield reference_wrapper<int>&>. However it yields int& due to the recursion logic in the specialisation.

And even worse,

common_reference_t<reference_wrapper<reference_wrapper<int>>,
                   int&>;

The above expression would also yield int& due to the recursion logic, even though the nested reference_wrapper is not convertible_to<int&>.

The rational behind this option is that reference_wrapper<T> behaves exactly the same as T&. But does it?

There is conversion from reference_wrapper<T> to T&, and if the result requires another conversion, the language does not allow reference_wrapper<T> to be converted to the result.

This would cover majority of the use cases. However, this does not cover the derive-base conversions, i.e. common_reference_t<reference_wrapper<Derived>, Base&>>. This is a valid use case and the authors believe that it is important to support it.

4.3 Supporting All Compatible Conversions (Option 3)

The above exposure can be extrapolated to any cv-qualified or other cross-type compatible conversions. That is, if common_reference_t<U, V> exists then common_reference_t<reference_wrapper<U>, V> and common_reference_t<U, reference_wrapper<V>> should also exist and be equal to it, given the only additional requirement that reference_wrapper<U> or reference_wrapper<V>, respectively, can be also implicitly converted to common_reference_t<U,V>. This statement only applies when the evaluation of common_reference_t falls through to basic_common_reference (see next section).

The authors propose to support such behavior by allowing basic_common_reference specialization to delegate the result to that of the common_reference_t of the wrapped type with the other non-wrapper argument. Furthermore, impose additional constraints on this specialization to make sure that the reference_wrapper is convertible to this result.

In order to support commutativity, we need to introduce two separate specializations, and further constrain them to be mutually exclusive in order avoid ambiguity.

Finally, we have to explicitly disable the edge cases with nested reference_wrappers since, while reference_wrapper<reference_wrapper<T>> is not convertible_to<T&>

4.4 Supporting cv-qualified reference_wrapper and Other Proxy Types

4.4.1 The Issue with cv-qualified Proxy Types

As implied in the previous sections, the rules of the common_reference trait are such that any basic_common_reference specialization is consulted only if some ternary expression of the pair of arguments is ill-formed (see 21.3.8.7 [meta.trans.other]/5.3.1).

More precisely, that ternary expression is denoted by COMMON-REF(T1, T2), where T1 and T2 are the two arguments of the trait, and COMMON-REF is a complex macro defined in 21.3.8.7 [meta.trans.other]/2. For the cases where both T1 and T2 are lvalue references, their COMMON-REF is the union of their cv-qualifiers applied to both. For example, given T1 is const X& and T2 is Y& (where X and Y are non-reference types), the evaluated expression is decltype(false ? xc : yc) where xc and yc are const X& and const Y&, respectively. Note that, the union of cv-qualifiers is const and it is applied to both arguments even though originally T2 is a non-const reference.

The origin and rationale for these contrived rules are rather obscure. But one consequence in the context of this paper is that there are interesting edge cases where the basic_common_reference treatment do not apply. Take,

int i = 3;
const std::reference_wrapper<int> r = i;
int& j = r; // ok.

That is, any cv qualification of reference_wrapper<int> itself does not change its semantics, since it is just a proxy to an int&. So, it would be natural to expect that int& should be the common reference of int& and const reference_wrapper<int>&, since objects of both types can be assigned to an int&.

However, because of the way COMMON-REF is defined, the evaluated ternary expression is decltype(false ? r : jc), where jc is const int&. Lo and behold, this expression is no longer ill-formed and evaluates to const int& (the conversion direction is no longer ambiguous, since reference_wrapper<int> can not be constructed from an int const&), and we get:

// in the current standard, with or without the basic_common_reference
// specialization of this proposal:
static_assert(std::same_as<
    std::common_reference_t<
       const std::reference_wrapper<int>&,
       int&
       >,
    const int&  // not int& !!
>);

This issue exists not only in reference_wrapper, but any proxy-like types with reference cast operators. For example,

struct A {};

struct B {
    operator A& () const;
};

Even though the builtin ternary operator ?: does return the expected type A&,

A a;
const B b;
static_assert(std::same_as<
    decltype(false? a : b),
    A&
>);

common_reference_t surprisingly results in const A&

static_assert(std::same_as<
    std::common_reference_t<A&, const B&>,
    const A&  // not A& !!
>);

4.4.2 The Fix

Per SG9’s direction, we’d like to fix this issue along with the basic_common_reference treatment in this paper. Let’s revisit the precise rules of common_reference trait [meta.trans.other#5.3]. Its member ::type is,

  1. COMMON-REF if not ill-formed.
  2. Otherwise, basic_common_reference if a specialization exists.
  3. Otherwise, decltype of ternary operator ?:.
  4. Otherwise, common_type.
  5. Otherwise, does not exist.

The reason why common_reference_t<const reference_wrapper<int>&, int&> does not use the basic_common_reference specialization and why common_reference_t<A&, const B&> does not use the ternary operator ?: is that Step-1 COMMON-REF is well formed. But it yields an undesired result.

Step-1 is important to have before the customization Step-2, because the COMMON-REF layer provides a generalized mechanism to handle reference cases before the user-specializable component. This makes the common_reference trait more convenient for users, and more importantly, harder to get wrong. For example, common_reference<tuple<int>&, tuple<int>&> should remain tuple<int>& and not tuple<int&> as would a straightforward basic_common_reference specialization for tuples yield (which is the current one in the standard [tuple#common.ref]). It would be unreasonable to expect each specialization to handle every reference combination correctly, exhaustively, and consistently.

Yet, COMMON-REF was probably not meant to deal with proxy references and user-defined conversions at all. It is used only when the types involved are reference types, and does not make any sense if it were meant to handle things that are convertible to reference types.

To rectify this situation, the authors propose to reject user-defined conversions entirely from Step-1. This would then allow Step-2 to provide the required custom semantics for any underlying proxy reference types where desired, and Step-3 to recover the ternary-operator based fallback.

This suggestion can be realized by an additional constraint on Step-1: Require a valid conversion to exist between each respective pointer types of the pair of arguments to the evaluated COMMON-REF result. Precise implementation can be found in the Wording section.

5 Implementation Experience

6 Wording

Modify 21.3.8.7 [meta.trans.other] section (5.3.1) as

Modify 22.10.2 [functional.syn] to add to the end of reference_wrapper section:

// [refwrap.common.ref] common_reference related
specializations
template <class R, class T, template <class> class RQual, template <class> class TQual>
requires see below
struct basic_common_reference<R, T, RQual, TQual>;

template <class T, class R, template <class> class TQual, template <class> class RQual>
requires see below
struct basic_common_reference<T, R, TQual, RQual>;

Add the following subclause to 22.10.6 [refwrap]:

template <class T>
inline constexpr bool is-ref-wrapper = false; // exposition only

template <class T>
inline constexpr bool is-ref-wrapper<reference_wrapper<T>> = true;

template<class R, class T, class RQ, class TQ>
concept ref-wrap-common-reference-exists-with = // exposition only
    is-ref-wrapper<R>
    && requires {
        typename common_reference_t<typename R::type&, TQ>;
    }
    && convertible_to<RQ, common_reference_t<typename R::type&, TQ>>
    ;

template <class R, class T, template <class> class RQual,  template <class> class TQual>
    requires(  ref-wrap-common-reference-exists-with<R, T, RQual<R>, TQual<T>> 
           && !ref-wrap-common-reference-exists-with<T, R, TQual<T>, RQual<R>>  )
struct basic_common_reference<R, T, RQual, TQual> {
    using type = common_reference_t<typename R::type&, TQual<T>>;
};

template <class T, class R, template <class> class TQual,  template <class> class RQual>
    requires(  ref-wrap-common-reference-exists-with<R, T, RQual<R>, TQual<T>> 
           && !ref-wrap-common-reference-exists-with<T, R, TQual<T>, RQual<R>>  )
struct basic_common_reference<T, R, TQual, RQual> {
    using type = common_reference_t<typename R::type&, TQual<T>>;
};

6.1 Feature Test Macro

Add the following macro definition to 17.3.2 [version.syn], header <version> synopsis, with the value selected by the editor to reflect the date of adoption of this paper:

#define __cpp_lib_common_reference  20XXXXL         // also in <type_traits>
#define __cpp_lib_common_reference_wrapper  20XXXXL // also in <functional>

7 References

[libcxx] Hui Xie and S. Levent Yilmaz. Implementation of common_reference in libc++.
https://reviews.llvm.org/D141200
[ours] Hui Xie and S. Levent Yilmaz. A proof-of-concept implementation of common_reference_t for reference_wrapper.
https://github.com/huixie90/cpp_papers/tree/main/impl/ref_wrapper
[P2542R2] Hui Xie, S. Levent Yilmaz. 2022-05-11. views::concat.
https://wg21.link/p2542r2